Storage: 0-5 ºC
Shipping Condition: Ambient Temperature
Required Equipment and Materials
micro plate; 10 μl, 100-200 μl, and 1000 μl pipettes; micro tubes; CO2 incubator
Contents of the Kit:
|H357-10: HilyMax reagent 1 vial, Lipoform buffer 1 ml x 1 vial
|H357-15: HilyMax reagent 5 vials, Lipoform buffer 1 ml x 5 vials
|H357-20: HilyMax reagent 10 vials, Lipoform buffer 1 ml x 10 vials
Various methods have been developed to express specific proteins in mammalian cells. The first method to introduce DNA to cells was calcium phosphateprecipitation. However, the transfection efficiency was very poor and there was a high rate of cell-to-cell variation. The second method introduced was the DEAEsephadex method. The transfection efficiency drastically improved, but still the method could not be used for all cells and required heavy metalions to enhance transfection efficiency. The cation liposome method was then developed, which proved to be a much better method to transfect DNA and RNA into cells. Other methods used are magnet bead, metal particle shoot, and electroporation. However, the cationic liposome method does not require any special instruments or special skill. Therefore, many researchers are using this method. HilyMax is a newly developed gene transfection reagent that forms a liposome to be used for highly efficient gene transfection to a wide variety of cells. In addition, in signal transduction research, HilyMax gives better signal because the reagent introduced in cells does not interrupt intracellular signal pathways (Fig. 3). Since serum in the growth medium does not interfere with the transfection using HilyMax, no exchange of the medium during the transfection is required. HilyMax does not contain biological components that might interfere with the transfection.
HilyMax readily interacts with DNA because cationic liposome(+) and anionic DNA(-) spontaneously form DNAliposome complexes. The overall charge of DNA-HilyMax complex is positive, so that the DNA-HilyMax complex is electrostatically bound on an anionic cell surface and introduces DNA into the cell by endocytosis.
The procedure is extremely simple. No exchange of the media is required during the whole process,
because serum in the medium does not interfere with the transfection.
Cell Signaling Research
Figure 1. Suitable signal transduction research using HilyMax.
The signal transduction from A549 cell was confirmed with the TNF-a stimulation. For detection of cellular response, IL-8 dependent luciferase expression vector was transfected with HilyMax or L2000. The signal transduction response was detected as luciferase activity after stimulation and suppression. The signal response using HilyMax was related with the amount of expressed IL-8 in the stimulated cell.
If you are interested in this issue click here for more Information.
Comparison Data in Insect Cell <New Data>
Data was kindly provided by Dr. Takashi Suzuki at Max Planck Institute of Neurobiology.
|| : S2(Schneider 2) cell, 200,000 cells/well|
|| : Schneider's Drosophila medium with 10% FCS|
|| : 50 units Penicillin/ml, 20 µg Streptomycin/ml|
|| : 24-well plate|
|| : 1 µg/well <pAct Gal4(6 kb), pUAS-mCD8::GFP(10 kb)>|
|| : 5 µl/well <HilyMax or Cfectin>|
||*Medium was changed in 4 hours after transfection.|
||*Schneider's Drosophila medium(without seum and antibiotics) was used for the complex preparation.|
GFP Transfected Cells with HilyMax
Transfection Efficiency in Various Cell Lines
Comparison Data of Transfection Efficiency with Commercially Available Reagents
The tranfection efficiency of HilyMax is higher than commercially available reagents in widely used cells. GFP expressed DNA was transfected using HilyMax and the other transfection reagents in serum containing medium. The amount of expressed protein indicates the transfection efficiency.
Transfection efficiency is low.
1. The volume of HilyMax is not enough. Increase the HilyMax volume.
2. Cell density is too high. Reduce the cell density. The appropriate cell density for transfection is about 40-90%.
3. HilyMax reagent is not be dissolved completely. Please check that the HilyMax solution is homogeneous.
4. Incubation time for the preparation of HilyMax and DNA complex is too long.
5. Your culture medium for DNA-HilyMax complex formation contains serum and/or antibiotics. Please use serum-free and
antibiotics-free medium for the complex formation.
Toxicity is high. Most cells died.
1. Reduce the amount of DNA and/or HilyMax. Prepare the complex.
2. Cell density is too low. Reduce the cell density. The appropriate cell density for transfection is about 40-90%.
Optimized Protocol (Click to download the PDF file)